Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® B50L 01 - PA6 - BASF

Material Data Center offers the following functions for Ultramid® B50L 01:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultramid B datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Thermal properties - Other properties - Material specific properties
Any use of this information falls under the rules of our disclaimer.
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 3000 MPa ISO 527
Yield stress 90 MPa ISO 527
Yield strain 4.5 % ISO 527
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 220 °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 65 °C ISO 75-1/-2
ASTM Data
Melting Temperature 220 °C ASTM D 3418
Other propertiesValueUnitTest Standard
Water absorption 9.5 % Sim. to ISO 62
Humidity absorption 2.6 % Sim. to ISO 62
Density 1130 kg/m³ ISO 1183
Moisture Content 0.06 % -
Water Absorption, Equilibrium 2.6 % ASTM D 570
Density 1130 kg/m³ ASTM D 792
Material specific propertiesValueUnitTest Standard
ISO Data
Viscosity number 320 cm³/g ISO 307, 1157, 1628
Characteristics
Processing
Blown Film Extrusion, Pipe/Tube Extrusion, Profile Extrusion, Sheet Extrusion, Blow Molding
Additives
Lubricants
Certifications
Food contact, Food approval FDA 21 CFR
Applications
General Purpose
Regional Availability
North America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.